button call button chat facebook button chat zalo button chat map

Bộ quản lý trung tâm TOA SX-2000SM

(0 lượt đánh giá)
Thông tin sản phẩm
Mã hàng/SKUSX-2000SM
Thương hiệuTOA
Nơi sản xuấtJapan
Bảo hành12 tháng
Đơn vịchiếc
Tình trạng HHHàng mới 100%
Tồn khoCòn hàng
.
.
zalo TƯ VẤN ZALO Giải đáp hỗ trợ tức thì
.

Giá bán: Liên hệ

Giá đã bao gồm VAT

Còn hàng

Tư vấn & Báo giá MUA NGAY Giao hàng tận nơi hoặc đến Showroom xem hàng

Bảng giá Trungchinhaudio.vn cập nhật liên tục và cam kết giá luôn tốt nhất. Vui lòng gọi 0902.188.722 hoặc yêu cầu báo giá qua email: kd@tca.vn để được công bố giá nhanh nhất có thể!

LỢI ÍCH LỰA CHỌN Tư vấn tậm tâm, chuyên nghiệp
Sản phẩm chính hãng
Trải nghiệm thực tế

Khi con người cảm thấy hài lòng, tín nhiệm, tràn đầy cảm xúc thì trên khuôn mặt mỗi người sẽ là hình thái khác nhau của những nụ cười. Thông qua những sản phẩm và dịch vụ mà chúng tôi mang lại, chúng tôi đang hướng tới một xã hội nơi khiển mỗi người đều thấy hạnh phúc hơn.

.

Sản phẩm trong combo
Mô tả
Thông số
Hỏi đáp & tư vấn

I. Giới thiệu bộ quản lý trung tâm TOA SX-2000SM:

Bộ quản lý hệ thống SX-2000SM được thiết kế để sử dụng trong hệ thống ma trận của TOA và nó có thể được đặt trong tủ rack tiêu chuẩn ( kích cỡ 1U). Nó có thể được sử dụng kết hợp với đơn vị đầu vào âm thanh, đơn vị đầu ra âm thanh và micro điều khiển từ xa của hệ thống SX-2000 để tạo ra một hệ thống ma trận hoàn chỉnh có khả năng thực hiện định tuyến tín hiệu âm thanh và điều khiển ưu tiên cho toàn bộ hệ thống.

Bản thâm SX-200SM đã được trang bị 8 đầu vào điều khiển, 8 đầu ra điều khiển, đầu ra thông báo trạng thái lỗi, đầu vào dữ liệu lỗi/ chuyển mạch, các chỉ số truy cập, chỉ số chế độ hoạt động, chỉ số lỗi cho phép điều khiển và theo dõi trạng thái hệ thống dễ dàng.

 

Bộ quản lý trung tâm TOA SX-2000SM

 

Lỗi xảy ra trên đường điều khiển đầu vào có thể được phát hiện bằng cách kết nối các điện trở trong đường dẫn của đầu vào đó.

SX-2000SM có thể hoạt động với nguồn điện 24V DC ổn định. Mỗi phương thức điều khiển đều có thể được thực hiện bằng cách cắm thẻ CF vào thiết bị SX-2000SM. Các thao tác điều hành trên toàn bộ hệ thống có thể được ghi lại và nội dung của nó được lưu trữ trong thẻ CF như là một dạng nhật ký điều hành.

II. Thông số kỹ thuật bộ quản lý trung tâm TOA SX-2000SM:

 

Power Source Usable power supply unit: VX-200PS
24 V DC (operational range: 20 V - 40 V DC)
Two power inputs construction enables dual- redundant power supply.
Current Consumption 1.1 A or less (maximum value in the power operating range)
0.8 A or less (when operated on 24 V DC)
Indication/Operation  SX link access indicator: 2
LAN access indicator: 1
Mode indicator: 3 (EMERGENCY/STANDBY/ CPU OFF)
Failure indicator: 3 (GENERAL/CPU/SX LINK)
Power indicator: 1 (POWER)
Run indicator: 1 (RUN)
Failure control switch: 3 (ACK/RESET/LAMP TEST)
SX Link
Network I/F 2 100BASE-TX circuits, RJ45 connector
Matrix System Specification Bus: 16
Audio input: Max. 64 ch
Audio output: Max. 256 zones
Contact input: Max. 1416
Contact output: Max. 1416
Priority control: 512 steps
Event log: Up to 1,000 logs per file (up to 100 files available)
Failure log: Up to 100 logs per file (up to 100 files available)
Matrix System Configuration Connectable SX-2100AI No.: Max. 8 units
Connectable SX-2000AO/2100AO No.: Max. 32 units
Connectable SX-2000CI No.: Max. 32 units
Connectable SX-2000CO No.: Max. 32 units
Connectable RM-200SA/SF No.: Max. 64 units (up to 8 RM-200SA per SX-2100AI)
Connection Cable/Device Shielded Category 5 twisted pair cable (CAT5-STP)
(Connect SX-2100AI and SX-2000AO/2100AO via the switching hub specified by TOA.)
Note: This network must be made completely independent from other LAN.
Number of Cascaded Switching Hub Up to 7
Maximum Cable Distance 100 m (between this unit and a Number of Cascaded Switching Hubs, or between Number
of Cascaded Switching Hubs)
LAN
Network I/F 1 10BASE-T/100BASE-TX circuit (selectable by automatic recognition), RJ45 connector
for maintenance use
Network Protocol TCP/IP
Connection Cable Shielded Category 5 twisted pair cable for LAN (CAT5-STP)
Maximum Cable Distance 100 m (between this unit and a Switching Hub, or between a Switching Hub and a PC)
Analog Link
Input/Output Connector Output: 2, RJ45 connector
Connection Cable Shielded Category 5 twisted pair cable (CAT5-STP)
(1 pair of audio wire + 1 pair of control wire (CPU OFF) +
1 pair of control wire (system reset/standby) + 1 pair of connection check wire)
Maximum Cable Distance Total length of analog audio link: 800 m
DS Link
Usable Unit VX-2000DS
Connector/Cable 2 interface, RJ45 Connector, Shielded Category 5 twisted pair cable (CAT5-STP)
Maximum Cable Distance 5 m


>> Một số sản phẩm cùng dòng dùng cho hệ thống âm thanh: Mô-đun giao tiếp IP TOA SX-200IP

 

Thông số kỹ thuật

Power Source Usable power supply unit: VX-200PS
24 V DC (operational range: 20 V - 40 V DC)
Two power inputs construction enables dual- redundant power supply.
Current Consumption 1.1 A or less (maximum value in the power operating range)
0.8 A or less (when operated on 24 V DC)
Indication/Operation  SX link access indicator: 2
LAN access indicator: 1
Mode indicator: 3 (EMERGENCY/STANDBY/ CPU OFF)
Failure indicator: 3 (GENERAL/CPU/SX LINK)
Power indicator: 1 (POWER)
Run indicator: 1 (RUN)
Failure control switch: 3 (ACK/RESET/LAMP TEST)
SX Link
Network I/F 2 100BASE-TX circuits, RJ45 connector
Matrix System Specification Bus: 16
Audio input: Max. 64 ch
Audio output: Max. 256 zones
Contact input: Max. 1416
Contact output: Max. 1416
Priority control: 512 steps
Event log: Up to 1,000 logs per file (up to 100 files available)
Failure log: Up to 100 logs per file (up to 100 files available)
Matrix System Configuration Connectable SX-2100AI No.: Max. 8 units
Connectable SX-2000AO/2100AO No.: Max. 32 units
Connectable SX-2000CI No.: Max. 32 units
Connectable SX-2000CO No.: Max. 32 units
Connectable RM-200SA/SF No.: Max. 64 units (up to 8 RM-200SA per SX-2100AI)
Connection Cable/Device Shielded Category 5 twisted pair cable (CAT5-STP)
(Connect SX-2100AI and SX-2000AO/2100AO via the switching hub specified by TOA.)
Note: This network must be made completely independent from other LAN.
Number of Cascaded Switching Hub Up to 7
Maximum Cable Distance 100 m (between this unit and a Number of Cascaded Switching Hubs, or between Number
of Cascaded Switching Hubs)
LAN
Network I/F 1 10BASE-T/100BASE-TX circuit (selectable by automatic recognition), RJ45 connector
for maintenance use
Network Protocol TCP/IP
Connection Cable Shielded Category 5 twisted pair cable for LAN (CAT5-STP)
Maximum Cable Distance 100 m (between this unit and a Switching Hub, or between a Switching Hub and a PC)
Analog Link
Input/Output Connector Output: 2, RJ45 connector
Connection Cable Shielded Category 5 twisted pair cable (CAT5-STP)
(1 pair of audio wire + 1 pair of control wire (CPU OFF) +
1 pair of control wire (system reset/standby) + 1 pair of connection check wire)
Maximum Cable Distance Total length of analog audio link: 800 m
DS Link
Usable Unit VX-2000DS
Connector/Cable 2 interface, RJ45 Connector, Shielded Category 5 twisted pair cable (CAT5-STP)
Maximum Cable Distance 5 m
Thông số kỹ thuật
Power Source Usable power supply unit: VX-200PS
24 V DC (operational range: 20 V - 40 V DC)
Two power inputs construction enables dual- redundant power supply.
Current Consumption 1.1 A or less (maximum value in the power operating range)
0.8 A or less (when operated on 24 V DC)
Indication/Operation  SX link access indicator: 2
LAN access indicator: 1
Mode indicator: 3 (EMERGENCY/STANDBY/ CPU OFF)
Failure indicator: 3 (GENERAL/CPU/SX LINK)
Power indicator: 1 (POWER)
Run indicator: 1 (RUN)
Failure control switch: 3 (ACK/RESET/LAMP TEST)
SX Link
Network I/F 2 100BASE-TX circuits, RJ45 connector
Matrix System Specification Bus: 16
Audio input: Max. 64 ch
Audio output: Max. 256 zones
Contact input: Max. 1416
Contact output: Max. 1416
Priority control: 512 steps
Event log: Up to 1,000 logs per file (up to 100 files available)
Failure log: Up to 100 logs per file (up to 100 files available)
Matrix System Configuration Connectable SX-2100AI No.: Max. 8 units
Connectable SX-2000AO/2100AO No.: Max. 32 units
Connectable SX-2000CI No.: Max. 32 units
Connectable SX-2000CO No.: Max. 32 units
Connectable RM-200SA/SF No.: Max. 64 units (up to 8 RM-200SA per SX-2100AI)
Connection Cable/Device Shielded Category 5 twisted pair cable (CAT5-STP)
(Connect SX-2100AI and SX-2000AO/2100AO via the switching hub specified by TOA.)
Note: This network must be made completely independent from other LAN.
Number of Cascaded Switching Hub Up to 7
Maximum Cable Distance 100 m (between this unit and a Number of Cascaded Switching Hubs, or between Number
of Cascaded Switching Hubs)
LAN
Network I/F 1 10BASE-T/100BASE-TX circuit (selectable by automatic recognition), RJ45 connector
for maintenance use
Network Protocol TCP/IP
Connection Cable Shielded Category 5 twisted pair cable for LAN (CAT5-STP)
Maximum Cable Distance 100 m (between this unit and a Switching Hub, or between a Switching Hub and a PC)
Analog Link
Input/Output Connector Output: 2, RJ45 connector
Connection Cable Shielded Category 5 twisted pair cable (CAT5-STP)
(1 pair of audio wire + 1 pair of control wire (CPU OFF) +
1 pair of control wire (system reset/standby) + 1 pair of connection check wire)
Maximum Cable Distance Total length of analog audio link: 800 m
DS Link
Usable Unit VX-2000DS
Connector/Cable 2 interface, RJ45 Connector, Shielded Category 5 twisted pair cable (CAT5-STP)
Maximum Cable Distance 5 m
Xem thêm

Sản phẩm liên quan

Sản phẩm bạn đã xem

Khách hàng nhận xét

Đánh giá trung bình

0/5

(0 nhận xét)
  • 5 sao
    0
  • 4 sao
    0
  • 3 sao
    0
  • 2 sao
    0
  • 1 sao
    0

Chia sẻ nhận xét về sản phẩm

Gửi đánh giá của bạn
Đánh giá: