Input Connectors |
Female XLR Pin 2 hot, pin 1 lift switch |
Input Type |
Electronically balanced/unbalanced, RF filtered |
Input Impedance |
Balanced > 20 k ohm, unbalanced > 10 k ohm |
Max Input |
>+30dBu balanced, > +26dBu unbalanced |
CMRR |
>100dB 20 Hz to 200 Hz, >80dB 200 Hz to 2 kHz, >60dB 2 kHz to 20 kHz |
Output Connectors |
Male XLR Pin 2 hot |
Output Type |
Transformer balanced/unbalanced, RF filtered |
Output Impedance |
Balanced 50ohm, unbalanced 25ohm |
Max Output |
Bal >+30dBm (into 600 ohm); Unbalanced (with UNBAL switch engaged) >+24dBm (into 600 ohm) |
Sidechain Input Connector |
Female XLR Pin 2 hot |
Sidechain Input Type |
Electronically balanced/unbalanced, RF filtered |
Sidechain Impedance |
Balanced >20 k ohm, unbalanced >10k ohm |
Sidechain Max Input Level |
>+30dBu balanced or unbalanced |
Sidechain Output Connector |
Male XLR Pin 2 hot |
Sidechain Output Type |
Unbuffered, hard-wired to INPUT, RF filtered |
Bandwidth |
01dB: 20 Hz to 20 kHz +0/-0.1dB, no gain reduction, unity gain; 1.0dB: 40 kHz +0/-1.0dB, no gain reduction, unity gain |
Frequency Response |
200 kHz +0/-3.0dB, no gain reduction, unity gain |
Noise |
<-92dBu, unweighted, 20 Hz to 20 kHz measurement bandwidth |
Dynamic Range |
>122dB |
THD+Noise |
0.008% typical at +4dBu, 1kHz, unity gain; 0.05% typical at +30dBu, 1kHz, unity gain; <0.1% any amount of compression up to 30dB, 1kHz |
IMD |
<0.02% SMPTE 4:1, no gain reduction, unity gain |
Deviation From Linear Phase |
|
Interchannel Crosstalk |
<-100dB, 20 Hz to 20 kHz |
VCA |
dbx V8™ |
VCA Dynamic Range |
>127dB |
VCA THD + Noise |
0.006% typical at +4dBu, 1 kHz, unity gain |
Stereo Coupling |
True RMS Power Summing |
Compressor Threshold Range |
-40 to +30dBu |
Compressor Ratio |
1:1 to Infinity:1 |
Compressor Threshold Characteristic |
Selectable OverEasy® or hard knee |
Compressor Attack/Release Modes |
Selectable Manual or Auto |
Compressor Manual Attack Time |
Scalable program-dependent. Typically 400dB/msec to 1dB/msec |
Compressor Manual Release Time |
Scalable program-dependent. Typically 4000dB/sec to 10dB/sec |
Compressor Auto Attack Time |
Program-dependent, typically 15 ms for 10dB, 5 ms for 20dB, 3 ms for 30dB |
Compressor Auto Release Time |
Program-dependent, typically 120dB/sec |
Compressor Output Gain |
-20 to +20dB |
Limiter Threshold Range |
+4dBu to >+30dBu (off) |
Limiter Ratio |
4:1 |
Limiter Type |
PeakStopPlus® two-stage limiter |
Limiter Stage 1 |
Instantaneous Transient Clamp |
Limiter Stage 1 Attack Time |
Zero |
Limiter Stage 1 Release Time |
Zero |
Limiter Stage 2 |
Intelligent Predictive Limiting |
Limiter Stage 2 Attack Time |
Program dependent, typically |
Limiter Stage 2 Release Time |
Program dependent, typically 22dB/sec |
Dimensions |
3.5” H X 19” W X 11.25” D |
设备重量 |
20.5 lbs (9.3 kg) |
Shipping Weight |
25.0 lbs (11.3 kg) |
Reference |
0dBu = 0.775Vrms |