Inputs | Mono Inputs Microphone Inputs (IMP Invisible Mic Preamp) Type: XLR, electronically balanced, discrete input circuit Mic E.I.N. (20Hz - 20kHz) @ 0 ohms source resistance: -134dB / 135.7dB A-weighted @ 50 ohms source resistance: -131dB / 133.3dB A-weighted @ 150 ohms source resistance: -129dB / 130.5dB A-weighted Frequency response < 10Hz - 150kHz (-1dB), < 10Hz - 200kHz (-3dB) Gain range: +10 to +60dB Max. input level: +12dBu @ +10dB gain Impedance: approx. 2.6k ohms balanced Signal-to-noise ratio: 110dB / 112dB A-weighted (0dBu In @ +22dB gain) Distortion (THD+N): 0.005% / 0.004% A-weighted Line Input Type: 1/4" TRS connector electronically balanced Impedance: approx. 20k ohms balanced, 10k ohms unbalanced Gain range: -10 to +40dB Max. input level: 30dBu Stereo Inputs Type: 1/4" TRS connector, electronically balanced Impedance: approx. 20k ohms Max. input level: +22dBu |
Attenuation | Fade-out Attenuation (Crosstalk Attenuation) Main fader closed: 90dB Channel muted: 89dB Channel fader closed: 89dB |
Frequency Response | Microphone input to main out < 10Hz - 90kHz: +0dB / -1dB < 10Hz - 160kHz: +0dB / -3dB |
EQ Section | EQ Mono Channels Low: 80Hz / ±15dB Mid: 100Hz - 8kHz / ±15dB High: 12kHz/ ±15dB EQ Stereo Channels Low: 80Hz / ±15dB Low Mid: 500Hz / ±15dB High Mid: 3kHz / ±15dB High: 12kHz / ±15dB |
AUX Sends | Type: 1/4" TS connector, unbalanced - 2x Impedance: approx. 120 ohms Max. output level: +22dBu |
AUX Returns | Type: 1/4" TRS connector, electronically balanced - 2x stereo Impedance: approx. 20k ohms balanced / 10k ohms unbalanced Max. Input Level: +22dBu |
Outputs | Main Outputs Type: XLR, electronically balanced and 1/4" TRS balanced Impedance: approx. 240 ohms balanced / 120 ohms unbalanced Max. Output Level: +28dBu Control Room Type: 1/4" TS connector, unbalanced Impedance: approx. 120 ohms Max. output level: +22dBu Headphones Output Type: 1/4" TRS connector, unbalanced Max. output level: +19dBu / 150 ohms (+25dBm) |
DSP | 24-bit Texas Instruments Converter: 24-bit Sigma-Delta, 64/128-times oversampling Sampling Rate: 40kHz |
Noise | Main mix @ -∞ Channel fader @ -∞ -101dB Main mix @ -0dB; Channel fader @ -∞ -93dB Main mix @ 0dB; Channel fader @ 0dB -81dB |
Power Supply | Mains voltage: 100 to 240 V~, 50/60Hz Power consumption: 46 W Fuse: 100-240V~: T 1.6A H Mains connection: Standard IEC receptacle |
Dimensions (HxWxD) | 3.5 x 16.9 x 14" (90 x 430 x 355mm) |
Weight | 12.1lb (5.5kg) |