| Power Source | 220-240 V AC, 50/60 Hz |
|---|---|
| Power Consumption | 30 W |
| Frequency Response | 20 Hz - 20 kHz, ±1 dB |
| Sampling Frequency | 48 kHz |
| Dynamic Range | 100 dB or more |
| Distortion | 0.03 % or less, 1 kHz, +4 dB(*2) input/output, 20 Hz - 20 kHz BPF |
| Crosstalk | -80 dB or less, 1 kHz |
| Input | Monaural input, 8 channels, removable terminal block (3P) Phantom power (+24 V DC, 10 mA, ON/OFF switchable for each channel) Gain setting (settable for each channel) :PAD ON Gain min., +4 dB(*2) (max. +24 dB(*2)), 10 kΩ, electronically-balanced Gain max., -14 dB(*2) (max. +6 dB(*2)), 10 kΩ, electronically-balanced :PAD OFF Gain min., -10 dB(*2) (max. +10 dB(*2)), 7 kΩ, electronically-balanced Gain max., -56 dB(*2) (max. -36 dB(*2)), 7 kΩ, electronically-balanced Stereo Input (L, R), 7 channels (1-A, 1-B, 1-C, 2-A, 2-B, 2-C, front-mounted input) RCA jack (stereo mini jack provided on the front panel) : -10 dB(*2) (max. +10 dB(*2)), 10 kΩ " Trim gain for each individual channel: - to 0 dB (except front-mounted input) ※ 1-A (L), 1-B (L), and 1-C (L) are mixed after passing through each trim gain circuit (the same applies to R channel) ※ 2-A (L), 2-B (L), and 2-C (L) are mixed with front-mounted input after passing " through each trim gain circuit (the same applies to R channel) |
| Output | Output, 4 channels, +4 dB(*2) (max. +24 dB(*2)), applicable load 600 Ω or more, electronically-balanced, removable terminal block (3P) REC OUT (L, R): -10 dB(*2) (max. +10 dB(*2)), applicable load 1 kΩ or more, RCA jack Gain is adjustable. |
| AD Converter | 24 bits |
| DA Converter | 24 bits |
| Preset Memory | 16 |
Signal Processing Section
| Automatic Resonance Control (ARC) Function | Automatic EQ curve creation by ARC, 4 channels (each output channel), settable independently on each channel, ARC measuring start switch ×1, ON/OFF LED ×1 |
|---|---|
| Feedback Suppressor Function | Feedback suppressor filter creation, 8 channels (each monaural input channel), settable independently on each channel, ON/OFF switch ×8, ON/OFF LED ×8 |
| Filter | 8 channels (each monaural input channel), settable independently on each channel, high-pass filter: 20 Hz - 20 kHz |
| Tone Controller | BASS, Low-shelving filter: 20 - 500 Hz, ±15 dB MID, parametric equalizer: 20 Hz - 20 kHz, ±15 dB Q: 0.267 - 69.249 TREABLE, high-shelving filter: 6 - 20 kHz, ±15 dB 10 channels (each monaural input channel, each stereo mixing input channel), settable independently on each channel |
| Equalizer | Parametric equalizer: 20 Hz - 20 kHz, ±15 dB, Q: 0.267 - 69.249 4 channels (each output channel) |
| Matrix | 12×4 |
| Crosspoint Gain | - to 0 dB in 1 dB steps |
| Automatic Mute Function | Stereo input section matrix, independent control |
| Function | Input PAD (-16 dB) control, low cut (cutoff frequency: 100 Hz) control, analog output attenuator (-6 dB, -12 dB, -18 dB, -24 dB, -36 dB, -42 dB) control, front panel operation lock function, stereo summing function, function setting panel (3 rotary encoders) |
|---|
Front Panel Section
| Input Level Indicator | 3-point LED, 12 channels (each monaural input channel, stereo 1L, 1R, 2L, 2R) |
|---|---|
| Output Level Indicator | 8-point LED, 4 channels (each output channel) |
| Auto Resonance Control (ARC) Measurement | ARC measuring start switch ×1, ON/OFF LED ×1 |
| Feedback Suppressor (FBS) Function | ON/OFF switch ×8, ON/OFF LED ×8 |
| Low Cut | ON/OFF switch ×8, ON/OFF LED ×8 |
| Stereo Summing | ON/OFF switch ×2, ON/OFF LED ×2 |
| Tone Control | BASS, MID, TREBLE/Settable on the function setting panel, 10 channels (each monaural input channel, stereo 1L, 1R, 2L, 2R) |
| Monaural Input, Analog Setting | Gain setting, PAD ON/OFF, Phantom power ON/OFF Settable on the function setting panel, 8 channels (each monaural input channel) |
| Stereo Input, Analog Setting | Trim setting Settable on the function setting panel, 6 channels (1-A, 1-B, 1-C), (2-A, 2-B, 2-C) |
| REC OUT, Gain Setting | Gain setting Settable on the function setting panel, 2 channels (REC OUT L, REC OUT R) |
| Preset Memory Switching | Preset selection switch ×4, ON/OFF LED ×4 |
| Front Panel Operation Lock | Operation lock switch ×1, ON/OFF LED ×1 |
| Operation Status Indication | Operation status LED ×3 |
| Function Setting Panel | Rotary encoder ×3, 10-point position indication LED ×3, Function mode LED ×3 |
| Analog Volume Fader | Input volume fader ×10, Output volume fader ×4, 2 faders linkable with supplied gang bar |
Control Section
| Contact Input | 8 channels, open voltage: 24 V DC, short-circuit current: 5 mA, removable terminal block (10P), |
|---|---|
| Contact output | 8 channels, no-voltage make contact, contact capacity: 24 V DC/100 mA, removable terminal block (10P), |
| Remote Control Panel | 2 channels, Maximum number of units: 8 units per channel 24 V DC input ×2, termination ON/OFF switch ×1, removable terminal block (10P) Maximum total cable length (star wiring): 800 m (total for 2 channels) Maximum cable length (daisy chain wiring): 400 m per channel Note: In daisy chain wiring, the number of units differs depending on the cable length. Star wiring and daisy chain wiring cannot be used together. Type of cable: Shielded CPEV cable (a pair of data cable and a pair of power supply cable) or shielded Cat 5 twisted pair cable for LAN (CAT5-STP) |
| Network | Network I/F: 1 channel of 10BASE-T/100BASE-TX (auto-negotiation) RJ45 connector, connection via switching hub Network protocol: TCP/IP Connection cable: Shielded Cat. 5 or higher twisted pair cable for LAN (Cat. 5-STP or better) Maximum cable length: 100 m (between M-864D and switching hub) |
| Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) |
|---|---|
| Operating Humidity | 90 %RH (no condensation) |
| Finish | Panel: Aluminum, hairline, black, Case: Surface-treated steel plate |
| Dimensions | 482.6 (W) × 177.1 (H) × 157.2 (D) mm (19 × 6.97" × 6.19")" |
| Weight | 5.1 kg (11.24 lb) |
| Accessories | Power supply cord (2 m (6.56 ft)) ×1, removable terminal plug (3P) ×12, large type removable terminal plug (10P) ×2, small type removable terminal plug (10P) ×1, fader gang bar ×4, protective cover ×1, rack mounting screw ×4, CD-ROM (containing setup software) ×1 |
| Option | Remote control panel: ZM-9011/9012/9013/9014 AC adapter: AD-246(*3)(When using the Remote Control Panel) |
Personal Computer Requirements
| Requirements | CPU: Pentium 4, 2 GHz or faster Memory: 1.5 GB or more (2 GB recommended) Display: 1024 × 768 resolution or higher Free Hard Disk Space: 16 MB or more, however 600 MB or more is required for the 32-bit version or 1.5 GB or more for the 64-bit version when “.NET Framework“ is not yet installed Optical Drive:CD-ROM drive, Network Adapter:10BASE-T or faster connection |
|---|---|
| OS | Windows XP Service Pack 3 or later, Windows Vista (32/64-bit) Service Pack 1 or later, Windows 7 (32/64-bit) |
| Required Component | .NET Framework 4 Client Profile |