JBL AWC15LF là chiếc loa “nhỏ gọn” và “nhẹ cân” với kích thước chỉ có 486 x 486 x 479 mm cùng trọng lượng chưa đến 24kg, điều này giúp cho việc vận chuyển cũng như lắp đặt được thuận tiện và dễ dàng hơn. Ngoài ra, hai bên loa được trang bị để tích hợp cho giá đỡ chữ U khi cầm nắm hoặc sử dụng để treo tường.
| Frequency Range (-10dB) |
45 Hz – 2.2 kHz |
| Frequency Response (±3 dB) |
70 Hz – 1.2 kHz |
| System Power Rating |
500 W (2000 W peak), 2 hrs. 300 W (1200 W peak), 100 hrs. |
| Sensitivity (2.83V @ 1m) |
94 dB (Ave. 80 Hz – 300 Hz) |
| Maximum SPL (1m) |
Direct 8Ω: 121 dB (peaks of 127 dB) 300 W Tap: 119 dB (peaks of 125 dB) |
| Nominal Impedance |
8 ohms (in Direct mode) |
| Transformer Taps |
70V: 300W, 150W, 75W, 38W 100V: 300W, 150W, 75W |
| LF Driver |
380 mm (15 in), Kevlar-reinforced cone, with weather treatment, 75 mm (3 in) voice coil, long throw. |
| Enclosure |
ABS with Glass enclosure, heavily braced |
| Attachment |
Two M10 (course-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. |
| Grille |
Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing. |
| Input Connection |
CE-compliant covered barrier strip terminals. Barrier terminals accept up to 8 mm outside 4 mm inside openlug (#6 or #8) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36") |
| Environmental |
IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs). |
| Dimensions |
486 x 486 x 479 mm (19.1 x 19.1 x 18.8), cabinet 507 mm (19.9 in) depth with gland nut 546 mm (21.5 in) including bracket extending to back |
| Included Accessories |
U-bracket, matches loudspeaker color (gray or black), zinc-rich extra-thick powder coated, steel. |
| Nominal LF Driver Impedance |
8 ohms (in Direct mode) |
| Suspension Attachment |
Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. |
| Net Weight (each) |
20.2 kgs. (44.5 lbs.) |
 Hướng dẫn sử dụng (Tiếng Anh) |
