Audio Inputs | 2x Combo XLR/TRS mic/line 1x 4-Pin Euroblock mic/line (in parallel) 1x 3-Pin Euroblock mic/line (in parallel) |
Input Impedance | Mic: -50 to 0 dBV @ 600 Ω (electronically balanced) Line: -27 to 0 dBV @ 600 Ω (electronically balanced) |
Phantom Power | 24 VDC Switchable on inputs 1 & 2 |
Audio Outputs | Amplifier Output: 1x 4-Pin female Euroblock Lo-Z Output: 2x terminals @ 4 Ω Hi-Z: 2x terminals @ 70/100 V (switchable) Output Regulation: < 2 dB (no load to full load) |
Remote Output | 1x 5-Pin Euroblock for optional wired remote |
Amplifier | Channels: Lo-Z: 1x 4 Ω (minimum) Hi-Z: 1x 70/100 V (switchable) Power Output: Lo-Z: 240 W RMS @ 4 Ω Hi-Z: 240 W RMS @ 70/100 V Minimum Impedance:: Lo-Z: 4 Ω (1% THD @ 1 kHz sine wave) Hi-Z: 20 Ω @ 70 V, 42 Ω @ 100 V (1% THD @ 1 kHz sine wave) |
Dynamic Range | Mic: 65 dB Line: 80 dB |
THD & Noise | 0.5% @ 1 kHz (rated output) |
Frequency Response | 50 Hz to 18 kHz (± 2 dB) |
Tone Controls | Low: +/- 15 dB @ 20 to 800 Hz Mid: +/- 15 dB @ 700 Hz to 7 kHz High: +/- 15 dB @ 5 to 20 kHz Q: 0.5 to 5 |
Connections | Remote: 1x 5-Pin Euroblock Common: -5 VDC @ 100 mA (short-circuit protected) Remote Power: 5 VDC @ 100 mA (current limited, short-circuit protected) RVC: 10 kΩ linear taper potentiometer Power On/Off: 5 VDC voltage make contact input, no open voltage Mute: No voltage make contact input, open voltage 5 VDC (short circuit: < 10 mA) Input 1 Control: No voltage make contact input, open voltage 5 VDC (short circuit: < 10 mA) |
Indicators | Power: Yellow LED ring illumination Overload: Red LED ring illumination Output Level: LED VU meter (yellow and red when clipping) |
Power Supply | Mains Voltage: 100 to 120/220 to 240 VAC, 60/50 Hz (switchable) Mains Connector: Standard IEC receptacle Fuse: T 6.3 AH 250 V/T 3.15 AH 250 V Power Efficiency: 77% maximum |
Power Consumption | Idle: 39 W 1/8 Power: 120 W 1/3 Power: 240 W Full Power: 620 W |
Dimensions (H x W x D) | 3.5 x 17.00 x 16.00" (8.8 x 43.2 x 40.6 cm) |
Weight | 12.8 lb (5.8 kg) |